AODD Pump Blog | SANDPIPER

Pumps in Oil and Gas Industry: Selection Guide | SANDPIPER

Written by Chad Heimlich | Nov 20, 2026, 12:45:00 PM

Selecting pumps in oil and gas industry applications requires more than matching flow rates and discharge pressures. From abrasive drilling fluids to volatile hydrocarbons and corrosive produced water, harsh operating conditions can accelerate equipment wear, increase maintenance demands, and create safety risks. Choosing the right pumping technology and configuration is essential to maintaining reliable fluid transfer.

For upstream, midstream, and downstream operations, air-operated double-diaphragm (AODD) pumps offer several advantages, including dry-run capability, self-priming operation, and the ability to handle challenging fluids. Gas-operated double-diaphragm (GODD) pumps and electric-operated double-diaphragm (EODD) pumps provide additional options for facilities with different power sources, operating requirements, and efficiency goals.

Understanding these technologies (and the factors that influence pump performance) can help engineers and maintenance teams select equipment that protects uptime, supports operational safety, and reduces long-term costs.

Why Diaphragm Pumps Excel in Oil and Gas Applications

Conventional centrifugal pumps can experience performance challenges when handling abrasive slurries, gas-entrained liquids, or applications involving intermittent flow and dry-running conditions. Positive displacement diaphragm pumps offer an alternative for many of these demanding duties. 

Rather than relying on rotating impellers to move process fluids, diaphragm pumps use reciprocating diaphragms to displace fluid through the pump chambers. Their sealless fluid-handling design eliminates mechanical shaft seals, reducing a potential source of leakage and maintenance.

Depending on the pump model and configuration, industrial diaphragm pumps provide several key advantages:

  • Superior Solids-Handling Capability: Clears non-suspended solids up to 3" without clogging.
  • True Dry-Run Capability: Designed to operate dry without the damage associated with running certain other pump technologies without fluid.
  • High-Lift Priming: Self-primes up to 24 ft. of dry suction lift from deep sumps and storage vessels.
  • High Viscosity Handling: Handles viscous fluids, including heavy crude oil and drilling muds, up to 20,000 cP without relying on rotating pumping elements.

These capabilities make diaphragm pumps a practical consideration for demanding oil and gas applications where consistent performance and reduced maintenance are priorities.

Key Factors When Selecting Pumps for Oil and Gas Applications

Choosing the best pump for an application starts with understanding the fluid, operating conditions, and facility requirements. While diaphragm pumps offer considerable versatility, selecting the right configuration is critical to achieving reliable performance.

 1. Fluid Characteristics and Solids Content

The properties of the fluid being transferred directly influence pump selection. Engineers should evaluate viscosity, chemical composition, temperature, abrasive content, and the size and concentration of any solids.

For example, drilling muds and settling pond slurries may require heavy-duty pumps with flap valves designed to pass larger solids. Corrosive produced water or chemical additives may require specialized wetted materials and elastomers to withstand the fluid chemistry.

2. Flow Rate, Pressure, and Suction Requirements

The pump must deliver the required flow at the system's operating pressure while accounting for piping losses, suction conditions, and changes in fluid viscosity.

Factors such as suction lift, discharge pressure, port size, and duty cycle should be evaluated against the pump's published performance curves.
Selecting a pump based on its maximum advertised flow rate alone can lead to performance shortfalls if the actual operating conditions are not considered.

3. Available Power Source

Different oil and gas facilities have different energy and infrastructure requirements.

Air-operated diaphragm pumps use compressed air, making them suitable for facilities with an existing air supply. Gas-operated diaphragm pumps are designed to operate using natural gas, making them a practical option for remote oil and gas production sites where natural gas is readily available, but access to compressed air or electricity is limited. Electric diaphragm pumps provide an alternative where electrical power is available, and energy efficiency or process control is a priority.

The best option depends on power availability, operating costs, site requirements, and the characteristics of the pumping application.

 

4. Safety and Regulatory Requirements

Facilities handling volatile, flammable, or hazardous fluids must evaluate pump safety features and applicable regulatory requirements.

Depending on the installation, considerations may include hazardous-area classifications, equipment certifications, grounding, exhaust management, and secondary fluid containment. ATEX Directive 2014/34/EU establishes requirements for equipment used in potentially explosive atmospheres within its scope, while North American installations may require compliance with applicable Class/Division or Zone classifications and recognized certification requirements, including CSA. These requirements aren't interchangeable, and engineers must verify that the specific pump model and configuration are appropriate for the operating environment.

For applications where fluid leaks pose significant safety or environmental risks, SANDPIPER Containment Duty pumps provide an additional layer of protection. Their secondary diaphragm and sealed containment chamber help prevent process fluid from escaping if a pumping diaphragm fails, while visual leak indicators and optional monitoring systems help personnel identify potential failures. Available in metallic and non-metallic configurations, these pumps can help reduce exposure risks and costly fluid losses.

For further guidance, review the SANDPIPER certifications, declarations, and guarantees resource.

5. Materials and Maintenance Requirements

Compatible wetted materials, valve components, and diaphragm elastomers are essential to long-term pump reliability. Metallic materials such as cast iron, 316 stainless steel, and Alloy C offer different levels of strength, abrasion resistance, and corrosion resistance, while elastomers such as PTFE, Santoprene, and FKM provide varying chemical and mechanical properties. Engineers should evaluate material compatibility against the fluid's composition, temperature, pressure, and operating conditions rather than assuming a material is suitable for every application. Service accessibility, replacement part availability, and technical support should also factor into lifecycle costs, particularly in severe-service environments where maintenance challenges can lead to costly downtime.

These considerations become especially important when evaluating the different fluid-transfer duties encountered throughout upstream, midstream, and downstream operations.

Critical Fluid Transfer Applications Across Oil and Gas Facilities

From remote production fields to refining facilities, pumps for oil and gas operations perform a wide range of transfer duties. Each application presents operating conditions that should guide equipment selection.

Flare Knockout and Sump Transfer

Flare knockout drums collect liquids from gas streams to help prevent liquid carryover into flare systems. These applications require reliable removal of accumulated condensate and other hydrocarbons.

When selecting a pump, engineers should consider fluid volatility, suction conditions, hazardous-area requirements, and available power sources. Applications involving potentially hazardous liquids may also benefit from additional containment features.

For additional information about pump selection and safety considerations for these applications, review SANDPIPER's flare knockout flyer and containment duty brochure. 

Produced Water and Saltwater Transfer

Produced water often contains dissolved salts, suspended solids, hydrocarbons, and potentially corrosive compounds. These characteristics can accelerate component wear and create material compatibility challenges.

Diaphragm pumps may be used for produced-water collection, transfer, and other handling duties, depending on the required pressures and flow rates. Engineers should evaluate abrasion resistance, chemical compatibility, and operating conditions when specifying equipment.

High-pressure injection into disposal wells requires separate evaluation to confirm that the pumping technology is suitable for the required injection pressure.

Settling Pond and Sludge Transfer

Settling ponds and holding tanks can accumulate drilling tailings, sludge, and other abrasive materials that are difficult to transfer with conventional pumping equipment.

Heavy-duty diaphragm pumps with appropriate valve configurations can help move these solids-laden fluids while reducing the risk of clogging and mechanical seal failures.

The size, shape, and concentration of solids are important factors in determining which pump configuration is suitable.

Bulk Fuel and Chemical Transfer

Oil and gas facilities also use pumps to transfer bulk fuels and chemicals such as corrosion inhibitors, biocides, and triethylene glycol.

These applications require careful evaluation of chemical compatibility, flow requirements, and operating pressure. Where controlled chemical dosing is required, engineers must also determine whether the pumping system can achieve the necessary accuracy and repeatability.

For more information about the advantages of diaphragm pumping technology, read our blog about why AODD pumps are perfect for oil and gas industry applications. 

BTEX and Glycol Dehydration Transfer

Glycol dehydration is an important process in midstream oil and gas operations, removing water from natural gas to help prevent hydrate formation, corrosion, and equipment downtime. During this process, triethylene glycol (TEG) absorbs water from the gas stream, creating a need for reliable transfer of glycol, entrained water, and associated hydrocarbons, including benzene, toluene, ethylbenzene, and xylene (BTEX).

Pump selection for these applications requires careful consideration of chemical compatibility, fluctuating temperatures, intermittent operation, and available power sources. Remote well pads may lack electrical infrastructure, making natural gas-operated diaphragm pumps a practical solution.

SANDPIPER's G-Series GODD pumps are designed to operate using compressed natural gas or compressed air, providing flexibility for facilities with different power sources. Their sealless design, dry-run capability, and available chemically compatible materials and elastomers support dependable fluid transfer in demanding dehydration applications.

Compression Skid Lube Oil and Glycol Transfer 

Natural gas compression skids help maintain the pressure needed to move gas through pipeline systems, particularly as reservoir pressure and well flow decline. These skids rely on lubrication and coolant systems to support equipment performance during startup, operation, and shutdown.

Day tanks commonly store lubricating oils and coolants for transfer to compression equipment. Skids may also incorporate sumps to collect leaked fluids, precipitation runoff, and other accumulated liquids that must be safely removed for treatment. These applications require pumps capable of dependable intermittent operation, dry-running, and handling varying fluid conditions.

SANDPIPER G-Series GODD pumps offer dependable fluid transfer for compression skid lubrication and sump handling applications. Their robust, all-bolted construction and serviceable design help support reliable operation and reduced maintenance downtime.

Learn more about SANDPIPER's pumping solutions for lubrication, coolant transfer, and sump handling in our compression skid brochure.

Choosing Between Air-, Gas-, and Electric-Operated Diaphragm Pumps

Once engineers have identified an application's fluid-handling and performance requirements, the next consideration is which diaphragm pump technology best fits the facility's available power source and operating priorities.

SANDPIPER offers a range of air-operated, gas-operated, and electric-operated double-diaphragm pumping solutions designed to address different industrial operating conditions.

Air-Operated Double-Diaphragm (AODD) Pumps

For oil and gas facilities with an established compressed-air supply,  AODD pumps provide reliable fluid transfer across a wide range of demanding applications.

Their self-priming and dry-run capabilities make them well-suited for intermittent duties such as sump transfer, tank drainage, and fluid recovery. Depending on pump configuration, AODD pumps can also handle abrasive slurries, viscous fluids, and solids-laden materials that create challenges for other pumping technologies. With no electric motor required at the pump, they offer a practical solution for facilities where compressed air is readily available, although hazardous-area suitability still depends on the specific model and installation.

However, compressed-air generation and distribution can contribute significantly to operating costs, particularly for pumps running continuously.

Gas-Operated Double-Diaphragm (GODD) Pumps

Unlike conventional AODD pumps, which are designed to operate on compressed air, GODD pumps are specifically engineered to use natural gas as a power source. Because natural gas presents flammability and exhaust-management hazards, standard AODD pumps should not automatically be considered suitable for this application.

SANDPIPER's G-Series GODD pumps are designed for natural gas-powered operation, with CSA-certified models available for installations meeting applicable certification and safety requirements.

These pumps are particularly valuable in remote oil and gas applications, including BTEX and glycol dehydration transfer and compression skid lubrication and sump handling, where natural gas may be more readily available than compressed air or electricity.

Engineers should evaluate applicable certification requirements, gas supply conditions, exhaust handling, and installation standards before selecting a GODD pump.

Electric-Operated Double-Diaphragm (EODD) Pumps

For facilities with access to electricity, electric double diaphragm pumps offer an alternative to compressed-air-driven equipment.

SANDPIPER's Cognito EODD pumps combine diaphragm-pump fluid-handling capabilities with the efficiency and controllability of an electric drive.

Depending on the application and configuration, Cognito EODD pumps provide several advantages:

  • Energy Efficiency: Electric operation can significantly reduce energy consumption compared with compressed-air-driven pumps, particularly in continuous-duty applications.
  • Improved Process Control: Electric drives enable flow adjustment and integration with compatible controls for applications requiring more consistent operating conditions.
  • Dry-Run and Solids-Handling Capabilities: Cognito EODD pumps retain important diaphragm-pump characteristics that support challenging industrial fluid transfer.
  • Monitoring and Protection: Available monitoring and control features can help operators identify operating issues and protect equipment when properly integrated into the pumping system.

EODD systems must also be equipped with appropriate pressure protection. Applications involving closed discharge valves or potential pressure spikes require suitable safeguards, such as pressure monitoring and a pressure relief valve or circulation loop.

Comparing AODD, GODD, and EODD Technologies

Technology

Key Considerations

Potential Applications

 

 

AODD

 

Compressed-air availability, fluid characteristics, and maintenance requirements

 

 

Sump transfer, abrasive fluid handling, and intermittent process duties

 

 

GODD

 

Natural gas availability, applicable certifications, and exhaust management

 

 

Remote upstream and midstream installations with available natural gas and appropriate safety provisions

 

 

 

EODD

 

Electrical supply, energy consumption, duty cycle, and control requirements

 

 

Continuous-duty transfer and applications prioritizing electric-drive efficiency and monitoring

 


Frequently Asked Questions About Oil and Gas Pumps

What type of pump is best for oil and gas applications?

The best pump depends on the fluid being transferred, required flow and pressure, available power source, and safety requirements. Diaphragm pumps are often a strong option for abrasive, viscous, solids-laden, or intermittently transferred fluids. However, no single pumping technology is ideal for every oil and gas application.

When should operators choose a gas-operated diaphragm pump?

Gas-operated diaphragm pumps may be appropriate for remote oil and gas installations where natural gas is available as a power source. Equipment must be specifically designed and approved for the intended service, and operators must account for gas supply, exhaust handling, and applicable safety requirements.

Are Electric Diaphragm Pumps More Energy Efficient Than Air-Operated Pumps?

Electric-operated double-diaphragm pumps can reduce energy consumption compared with pneumatic pumps by eliminating the need for compressed air to drive the pumping mechanism. Actual savings depend on the pump model, operating conditions, duty cycle, and efficiency of the existing compressed-air system.

What Factors Affect Diaphragm Pump Reliability?

Fluid compatibility, abrasive content, operating pressure, flow requirements, installation conditions, and maintenance practices all influence pump reliability. Selecting the appropriate materials and pump configuration, along with access to technical support and replacement parts, can help improve long-term performance.

Find the Right Pump for Your Oil and Gas Application

Whether your application calls for an air-operated, gas-operated, or electric-operated double-diaphragm pump, the right configuration can help reduce maintenance challenges, support safe fluid transfer, and improve long-term reliability.

SANDPIPER offers a broad range of engineered pumping solutions backed by experienced technical specialists and factory-authorized distributors. From initial pump selection to ongoing maintenance and support, our team can help you identify a reliable solution for your operating conditions.

Find your local SANDPIPER distributor to discuss your application and select a pump designed for the job. You can also Contact An Expert by completing the form here. 

Pump specifications may vary by region.