The G10F dual-power flap valve pump runs off compressed air or natural gas. Canadian Standards Association (CSA) certification is one of the many certifications standard on this pump, ensuring safe and reliable pumping performance as required in oil and gas upstream and midstream applications.
SANDPIPER G-Series pumps handle both sweet and sour gas and allow for complete groundability. Designed to pass solids and sediment commonly found in tanks and sumps, the 1” flap valve pump provides discharge pressures up to 100 psi and class-leading flow rates up to 70 gpm. This pump is available in both aluminum and stainless castings.
SANDPIPER offers an exclusive externally serviceable air distribution system. When dirty air enters an AODD/GODD pump, it will require frequent servicing of the air distribution system. SANDPIPER is the only AODD/GODD pump manufacturer to offer an externally serviceable air distribution system (ESADS+), which allows complete access to the main air and pilot valves without removing the pump from service. Repair or clean in five minutes (versus 55 minutes for competitors), reducing your downtime by as much as 90%.
SANDPIPER’s G-Series pumps carry the following certifications:
To determine chemical compatibility with this pump, please refer to our Chemical Compatibility Guide.
|1" (25.4mm) NPT/BSP
|0 to 70 gpm (265 lpm)
|Air Distribution Valve
|No-lube, no-stall design
|Up to 1" (25mm)
|Heads Up To
|100 psi or 231 ft. of water (7 bar or 70 meters)
|.10 gallons (.38 liters)
|Max Operating Pressure
|100 psi (7 bar)
48 lbs (21kg)
79 lbs (36kg)
SANDPIPER can provide you with a CAD file to save time and improve the quality of your final design, as well as reduce measurement and documentation packet errors. Contact us today to request yours.
Get the expertise you need to overcome AODD pumping challenges and find the answers that will set you up for success. Here's how: