Other Accessories

Leak Detection

Electronic versions provides a signal via warnings lights, an audible alarm, or the pump can be shut down. Visual versions simply have a sight tube that fills with fluid if a diaphragm breaks. Mechanical leak detection opens an air valve, which activates a customer supplied solenoid to trigger a signal.  For use with the Containment Duty Spill Containment SANDPIPER pumps only.

Contact Distributor to Learn More

Pulse Output Kit

Offered in a wide variety of sizes and voltages. These controls interface with the SANDPIPER Batch Controller, or your own process controls (PLC’s). Available in kits for field installation, or factory built into a new pump.

Contact Distributor to Learn More

Mufflers

Rugged polymer or metallic housing that work as effective sound dampening for SANDPIPER pumps, meeting OSHA dBA requirements.

Contact Distributor to Learn More

Air Line Solenoid

Provides automatic on/off operation of air-driven equipment. 110/120VAC and 220/240VAC (50/60 hertz) kits operate with the SANDPIPER or customer’s control units. 12VDC and 24VDC kits operate with customer-supplied controls only.

Contact Distributor to Learn More

Inlet Stabilizer

Blacoh® Sentry® Inlet Stabilizers reduce pressure fluctuations and assist pump head filling during each inlet stroke. In high suction applications, stabilizer will momentarily maintain the flow of the accelerated fluid.

Contact Distributor to Learn More

Electronic Speed Control

Provides accurate control of variable flow rates, from zero flow to maximum. Operates on 110 or 220VAC with on-board, single turn potentiometer or automatic mode for remote control using the optional 4-20 mA input terminal.

Contact Distributor to Learn More

Stroke Counter/Batch Control

Offers performance and repeatability with an interfaceable electronic control to program repetitive diaphragm pump operations. The complete system requires the Batch Controller, the Pulse Output Kit & the Air Line Solenoid.

Contact Distributor to Learn More

Water Separator

This point-of-use water separator is designed to remove 99% of the water, rust and other contaminants commonly present in compressed air lines. Clean, dry air enhances the life and performance of pneumatically-driven equipment.

Contact Distributor to Learn More